Fusheng Air Oil Separators

Our air oil separator can ensure the normal, safe, and high-efficient operation of the Fusheng screw air compressor. It is made of the qualified stainless steel through using the international latest filtering technology and our advanced technology. Due to the special structure design, it is extremely suitable for the oil immersed vacuum pump. This design allows the maximum differential pressure of 0.15Mpa. After the air-oil separating, only 3mg/m³ oil residue amount will be left.

Safe Use

1. A safety valve is set on the cap of the air oil separator. When the pressure inside the separator is 1.1 times more than the set value, it will automatically open to discharge some air for lowering the pressure. When the air compressor is working, you can slightly pull the rod on the safety valve. If the valve can exhaust outward, then it needs no replacement or repairing.

2. The separator is installed with a pressure gage to test the pressure before filtering. On its bottom part, a discharging valve is fixed to regularly release the precipitated water or dirt.

3. It also has a transparent mirror to show the oil level. When the air compressor works normally, the oil level should be in the middle part. Otherwise, the higher or lower oil level will affect the safety of the machine.

4. This type of air oil separator should be made by a professional manufacturer, since it is a pressure vessel. Each separator is available with the exclusive serial number and certification.